OVERTURE 10KG Bundle PETG 3D Printer Filament 1.75mm, Neatly Wound Durable PETG 10kg Spool (22.2lbs), Strong Toughness Filament,

PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little shine or spark to it.Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.FAQs:Why cant the filaments stick to the build bed?1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;4. If the effect is not good, it is recommended to try printing the draft before printing.Specification: Temperature Recommended Extrusion/Nozzle Temp: 230C - 250C (446?~ 482?)Heated Bed Temp: 80C - 90C (176?~ 194?)Filaments Diameter and Accuracy: 1.75 mm +/- 0.02 Recommended Printing Conditions:Cooling Fan: Turned onPrinting Speed: 30~50(mm/s)Raft Separation Distance: 0.14(mm)Retraction Distance: 1~3 mm(Note:Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)Packaging Included:6 spool of PETG filaments&nbsp