OVERTURE ABS Filament 1.75mm, High Strength & Heat-Resistant 3D Printer Filament, Low Warping, Excellent Durability, ABS 1kg (2.

Note: The recommended print setup for Overture filaments could be slightly different from other filaments; Pls read the description below, you may also get some practical suggestions through QA/ Top Review  from others. FAQs: Why cant the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature; 2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion ; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.     Specification: Recommended Extrusion/Nozzle Temp:  245 C - 265C (473?~ 509? ), Heated Bed Temp:  80C - 100 C (176?~ 212?)/ PVP stick helps Printing Speed:30~70 mm/s (1,800~4,200mm/ min) Fan: Low for better surface quality; Off for better strength Raft  Filaments Diameter and Accuracy: 1.75 mm +/- 0.02 Filaments Net Weight: 1 kg (2.2 lbs)   Packaging Included: 1 spool of ABS filaments